Free Project Circuit Schematic Articles Search

Custom Search
WELCOME to "FREE PROJECT CIRCUIT SCHEMATIC"

Sponsor Links

AmericasBest.com

Saturday, October 16, 2010

Motion (Motor) Control Servo System Block Diagram


This is a figure for a block diagram of a modern automated systems incorporate closed-loop feedback for motion control. They typically include a servo system that consist of feedback elements and motor driver combined in a manner. This will give accurate and stable control over speed and position. Below is the illustration of the various system-level components of a typical servo system. This is the figure of the diagram;


For processing the high-speed encoder signals, typical motion-controller cards and modules include a motion-control IC, a microprocessor, and a DSP or custom ASIC. Velocity and direction of rotation signals to the driver or amplifier is provided by the controller which in turn provides the proper levels of voltage and current (power) to operate the motor. We must have address the following items at the system level to design robust and fault-tolerant motion-control system with feedback during design: Controller-encoder input circuits (receiver circuits), Receiver circuit PC-board layout  and Encoder-signal cabling system. Motion-controller inputs, such as hard-wired emergency stop and limit inputs, should also be considered when designing a fault-tolerant feedback system though not addressed in this article.

1 comments:

Aqib said...

Good Work.that's a great project but if i use oscillation in that circuit that may be helpful to generate oscillation.

Post a Comment